We are an Authorized Reseller.

   

Site Navigation


Main Page

Who Are We?

We ask Why not

Press Releases

Product Info

Product Test Data

Download Product info

Frequently Asked Questions

ORDER NOW!

Public Service Pages

Privacy Policy

Fire Related Links

Other Links
 

 

©2007,2008, 2009
 
Texas
Fire-Safety.com

All Rights Reserved.

Phone:(214) 763-8448
 


 can also be found on

Kellysearch

 

 

One coat, flame retardant wood treatment where fire codes require Class "A" fire protection.

For Commercial and Residential Use

Class "A" may be applied to most  wood surfaces including wood siding, shake shingles, fences and decking. When professionally applied to exterior wood Class "A" has withstood up to 200 inches of rain or five years without re-treatment (we still recommend re-treating every year!).

  Class "A" also acts as a fungus inhibitor and is resistant to most insects, rodents and certain molds.

Class "A" is an odorless (when dry), colorless, non-toxic formulation that prevents flames from spreading by a chemically self extinguishing reaction. Our water-based fire retardants are economical to apply because they only require one coat. Many other fire retardants require two or three applications with high pressure equipment. is shipped ready to use with no mixing or dilution required.

  Because Class "A" is a water based product, it will not cover over painted or stained surfaces very well. We have had a report of paint damage when the product was used over paint. We do not recommend the use of this product over paint, mainly because it is water based and may not cover evenly. We also do not advise using the product on deck or walking surfaces where moisture may be present at times. The product may become sticky with moisture.

   Please note: Class "A" is vary pungent while being applied. Please apply with plenty of ventilation and a mask if necessary. Spraying naturally makes the smell stronger. The odor will increase dramatically if spraying. Will dry odorless. Keep ventilation going until product is dry.

Click here to read the Construction Specifications Institute Spec-Data Sheet.


Testing Data for Class "A"

Note: We have withdrawn our listing with UL for economic reasons at this time. The product has not changed, nor will it. All test data is still valid. The only difference is that we are not currently listed with UL.

CLASSIFIED FIRE RETARDANT COATING 84E5

Surface Burning Characteristics of Applied Coating
Surface Douglas Fir
Flame Spread:
Smoke Developed:
No. of Preliminary Coats:
Rate per Coat (ft2/gal):
No. of Fire Retardant Coats:
Rate per Coat (ft2/gal):
No. of Overcoats:
Rate per Coat (ft2/gal):
Flash Point of Fire Retardant:
Coating-Closed Cup:
25
300
None
-----
1
260
None
-----

No Flash


CLASS "A" PRODUCT ON
DOUGLAS FIR

Click here to read the Underwriters Laboratories report.

Click here to read the United States Testing Company report.


MSDS Sheet is available here
( in PDF format)
Please contact us if you have questions. MSDS Sheet can be misleading.



order online

Note:  Shipping is calculated upon receipt of order. We will Notify you via email of the total due.

To discourage robot e-mail harvesters from visiting this site, this link has be added
Help The Fight Against Spam!

 

 

 Texas Fire-Safety.com
2310 Park Row
McKinney, TX 75070

Please call or write for information.
Voice: (214) 763-8448  
 

EMail: info@texasfire-safetyNoSPAM.com
please remove the NOSPAM from above before sending, thanx
            IMPORTANT!! Please put your phone number in any emails. Some Spam Blockers can keep you from receiving our emails.

 

Copyright 2007,2008,2009  Texas Fire-Safety.com

Flame-No-MoreTM and Flame-OutTM are registered trademarks of the CareChem Corporation (now Premiere Finishing Co., Inc.).

Hosted by Maintained by www.hilton2000.com. Contact the webmaster with site related questions.

Modified last 01/03/2009 05:29 PM -0600 jh